How Much Gravel for a 16×50 Driveway?
A 16×50 ft driveway at 3 inches deep needs 7.78 cubic yards of gravel (including 5% waste). Switch between gravel types below to see ton estimates for pea gravel, crushed stone, river rock, and #57 stone.
Gravel type
You'll need
7.78 cubic yards
Tons
10.50
Pounds
21,000
Density
1.35 t/yd³
Includes 5% waste. Adjust dimensions in the full calculator →
How This Calculator Works
How we calculated this page
16 ft × 50 ft × (3" ÷ 12) = 200.00 cu ft base ÷ 27 = 7.41 cu yd × 1.05 waste = 7.78 cu yd
The standard formula for any rectangular gravel area — and the same math the full calculator uses:
Volume Area (sq ft) = Length × Width Volume (cu ft) = Area × Depth (depth converted to feet) Volume (cu yd) = Volume (cu ft) ÷ 27 Apply waste factor Final cu yd = Volume (cu yd) × (1 + Waste% ÷ 100) Weight Tons = Final cu yd × Density (tons/yd³) Pea gravel: 1.40 t/yd³ Crushed stone: 1.35 t/yd³ River rock: 1.35 t/yd³ #57 stone: 1.35 t/yd³
One cubic yard equals 27 cubic feet — the conversion that trips up most DIYers. The cubic yard volume is identical for all gravel types; only the weight (tons) differs based on density. Actual density can vary ±5–10% depending on moisture content and the specific quarry source.
The 5% waste factor accounts for uneven ground, edge spillage, and settling after compaction. For a first-time project or irregular area, increase to 10%.
Worked Example — 16 × 50 ft at 3" (Crushed Stone)
Area: 16 × 50 = 800 sq ft
Volume: 800 × (3 ÷ 12) = 200.00 cu ft ÷ 27 = 7.41 cu yd
With 5% waste: 7.41 × 1.05 = 7.78 cu yd
Weight (crushed stone): 7.78 × 1.35 = 10.50 tons
Common Project Sizes
Crushed stone density (1.35 t/yd³) used for ton estimates. 5% waste factor included.
| Driveway Size | Depth | Cubic Yards | Tons (Crushed Stone) |
|---|---|---|---|
| 10 × 20 ft | 3" | 1.94 | 2.62 |
| 12 × 30 ft | 3" | 3.50 | 4.73 |
| 12 × 40 ft | 3" | 4.67 | 6.30 |
| 16 × 40 ft | 3" | 6.22 | 8.40 |
| 20 × 40 ft | 3" | 7.78 | 10.50 |
| 20 × 60 ft | 3" | 11.67 | 15.75 |
| 12 × 40 ft | 6" | 9.33 | 12.60 |
| 20 × 40 ft | 6" | 15.56 | 21.00 |
How to Use This Calculator
The values above are pre-calculated for a 16×50 ft driveway at 3". Use the material tabs to switch between pea gravel, crushed stone, river rock, and #57 stone — the cubic yard volume stays the same, but the weight (tons) changes with each material's density.
If your driveway or area is a different size, use the full gravel calculator — it accepts any dimensions, depth, and material type.
When placing a bulk order, share the ton estimate with your supplier — most gravel yards price by the ton, not by the cubic yard. The cubic yard figure is useful if you're renting a dump truck or skip bin that charges by volume.
Frequently Asked Questions
How much gravel do I need for a 16×50 driveway?
A 16×50 ft driveway at 3 inches deep needs 7.78 cubic yards of gravel (with 5% waste). That's about 10.89 tons of pea gravel or 10.50 tons of crushed stone or #57 stone. For a 6-inch deep base, you would need double the volume.
How many cubic yards of gravel do I need?
Multiply your area in square feet by the depth in feet, then divide by 27 to convert to cubic yards. For example, a 12×40 ft driveway at 3 inches deep: 480 × 0.25 ÷ 27 = 4.44 cubic yards base, plus 5% waste = 4.67 cubic yards. The values on this page include the 5% waste factor.
How deep should gravel be on a driveway?
A standard residential driveway needs 3–4 inches of compacted gravel for light vehicle traffic. For a new driveway or heavy vehicle use, plan on 6 inches total — typically 4 inches of compacted base stone topped with 2 inches of surface gravel. This page uses 3 inches as the standard depth; see the 6-inch version for a heavier base.
How many tons of gravel do I need?
Gravel suppliers typically sell by the ton for bulk orders. Pea gravel weighs about 1.40 tons per cubic yard; crushed stone and #57 stone weigh about 1.35 tons per cubic yard. Use the material tabs above to see the ton estimate for your chosen gravel type.
Should I add a waste factor for gravel?
A 5% waste factor is appropriate for a clean rectangular driveway with established edging. Use 10% for irregular areas, slopes, or if the subgrade is rough and uneven. The values on this page include a 5% waste factor. For larger projects with variable ground conditions, round up when ordering.
What is the difference between pea gravel, crushed stone, and #57 stone?
Pea gravel is smooth and rounded — comfortable underfoot but shifts without edging. Crushed stone has angular faces that interlock under load, making it more stable for driveways. #57 stone (3/4" crushed limestone or granite) is a popular driveway choice that compacts well while allowing drainage. River rock is decorative and works well in drainage beds.
Related Calculators
Concrete Calculator
Calculate concrete for slabs, footings, and columns. Get cubic yards, bag count, and weight.
Gravel Calculator
Calculate gravel, crushed stone, and pea gravel by weight or volume for any area.
Mulch Calculator
Find out how many bags or cubic yards of mulch you need for any bed or landscape.
Fence Calculator
Estimate posts, panels, concrete, and pickets for wood, chain link, or vinyl fencing.
Flooring Calculator
Calculate square footage and box count for hardwood, laminate, vinyl, tile, or carpet.